Made in the USA: two new turntables from MoFi Electronics


munich_2016German –> English. ‘Plattenspieler mit Wechselstrom motor’? A record player with AC motor. ‘Riemenantrieb’? Belt drive. ‘MDF-zarge’? MDF plinth. ’10 Zoll tonarm’? That one you probably can guess: 10″ tonearm. ‘Delrin teller’? Delrin platter. Easy, hey.

These are many of the ingredients used by Allen Perkins of Spiral Groove in designing the first two turntables, the StudioDeck (€1199) and the UltraDeck (€1999), for Mobile Fidelity Recordings new hardware line, subtitled MoFi Electronics.

The UltraDeck offers a thicker Delrin platter than the StudioDeck (32mm vs 19mm), Cardas tonearm wiring and a plinth with ‘constrained layer damping’.

Joining the turntable duo are two corresponding phono stages, the more expensive one with Class A headphone amplifier, both with mono/stereo switching and both designed by Tim de Paravicini who was instrumental in putting together the electronics chain at MoFi’s Californian mastering studio.

On top of that, a trio of MM cartridges, all made in Japan. Expect to these bundled with either ‘table, fitted/aligned at the factory and discounted.


The headline for this commentator is that the two ‘tables will be made in the USA when they go into production later this year. Elsewhere in the USA, only SOTA and VPI keep production on home turf so an affordable range of US-made ‘tables will likely be welcomed with open arms, especially with Perkins’ and MoFi’s collective pedigree.

For now, the StudioDeck and UltraDeck remain prototypes still in need of a little finessing before each design is finalised. However, they are apparently a long way from the crude units that debuted at CES 2016 in January.

Jonathan Derda, who some may recognise as ex-Peachtree Audio, walks us through the forthcoming range in extensive detail here:

Further information: MoFi




DAR 750 x 290

Written by John H. Darko

John lives in the NOW + HERE = NOWHERE. He derives an income from the ad revenues of DAR. John is also an occasional staff writer for Stereophile, 6moons and TONEAudio.

Twitter: DarkoAudio
Instagram: DarkoAudio
Facebook: DAR


Leave a Reply
  1. I believe the U-turn Orbit is still built in Boston which is still considered by many to be part of the US.

    • Indeed – thanks for the reminder. 🙂 My point is that there aren’t that many US-made turntables.